MOLEGRIDTM HRM05 D is a DLP printing resin for temperature-resistant compression molding. It has the characteris- tics of low odor, high precision, non-deformation of the compression mold, and repeated use. It is suitable for various DLP equipment in the 405nm band.
MOLEGRIDTM HRM05 D is widely applied in silica gel mold, especially suitable for casting factories, studios and individual design.
Basic Physical Properties:
|Density g/cm3 @25℃||Viscosity cps @25℃||Tensile strength Mpa||Tensile modulus Mpa||Elongation at break||Flexural strength Mpa||Flexural modulus Mpa||Impact value J/m||Heat deflection temperature ℃@0.45MPa||Hardness||Ashes||Tear strength kN/m|