Menu
Feature Introduction:
PC K7 is a specialized PC consumable applicable to desktop FDM/FFF. With targeted improvements, it makes enhancement in warping and inadequate interlayer bonding when PC materials apply to desktop printers. Thus, it is applicable to printed products or structural parts which are high strength or require a certain heat resistance temperature.
Basic Physical Properties:
| PC K7 | Printed copy (horizontal printing of sample, 100% linear filling) | Injection molded parts | Test standards |
| Density (g/cm3) | 1.20 | ISO 1183 | |
| Melt flow rate (MFR) 1 | 30-40 | ISO 1133 | |
| Heat deflection temperature(HDT)2 | 107 | ISO 75 | |
| Vicat softening temperature(VST)3 | 116 | ISO 306 | |
| Tensile strength (MPa) | 65-75 | ISO 527 | |
| Elongation at break(%) | 11-16 | ||
| Maximum force(Mpa) | 90-93 | ISO 178 | |
| Flexural modulus(Mpa) | 2200-2400 | ||
| Impact strength(KJ/m2) | 35-40 | ISO 179 | |
| Notch impact strength1(KJ/m2) | 2-4 | ||
*1. Test condition: temperature (T)=260 ℃; Mass (m)=1.2kg.
*2. Test condition: bending stress=0.45MPa; Heating rate=120 ℃/h.
*3. Test condition: load=10N; Heating rate=120 ℃/h.
