Menu
Feature Introduction:
PLA K5 is applicable to a variety of mainstream printers. Not only is it an excellent all-around, economical product, but its improved toughness and fluidity offer a wide range of printing temperatures and speeds. Applicable to rapid and large-size model printing, it prints smooth-surface products without warping and deformation.
Basic Physical Properties:
| PLA K5 | Printed copy (horizontal printing of sample, 100% linear filling) | Injection molded parts | Test standards |
| Density (g/cm3) | 1.23-1.25 | ISO 1183 | |
| Melt flow rate (MFR) 1 | 6-12 | ISO 1133 | |
| Heat deflection temperature(HDT)2 | 57 | ISO 75 | |
| Vicat softening temperature(VST)3 | 57 | ISO 306 | |
| Tensile strength (MPa) | 36-42 | ISO 527 | |
| Elongation at break(%) | 10-15 | ||
| Maximum force(Mpa) | 70-75 | ISO 178 | |
| Flexural modulus(Mpa) | 2700-3000 | ||
| Impact strength(KJ/m2) | 25-30 | ISO 179 | |
| Notch impact strength1(KJ/m2) | 4-8 | ||
*1. Test condition: temperature (T)=190 ℃; Mass (m)=2.16kg.
*2. Test condition: bending stress=0.45MPa; Heating rate=120 ℃/h.
*3. Test condition: load=10N; Heating rate=120 ℃/h.
