Feature Introduction:
PLA K6 is an upgraded PLA material with high toughness. The modified material is designed with high toughness in both injection molded and printed products. The impact strength of injection parts is more than 10 times that of raw materials; the unnotched impact strength of printed products is also more than 3 times that of injection products made by raw materials, and their notched impact strength is more than 6 times that of raw materials. Furthermore, it retains the edges of PLA printing, such as no warpage and great interlayer bonding, thus it is applicable to structural parts with higher engineering performance requirements.
Basic Physical Properties:
PLA K6 | Printed copy (horizontal printing of sample, 100% linear filling) | Injection molded parts | Test standards |
Density (g/cm3) | 1.22-1.24 | ISO 1183 | |
Melt flow rate (MFR) 1 | 4-6 | ISO 1133 | |
Heat deflection temperature(HDT)2 | 54 | ISO 75 | |
Vicat softening temperature(VST)3 | 59 | ISO 306 | |
Tensile strength (MPa) | 34-38 | ISO 527 | |
Elongation at break(%) | 10-15 | ||
Maximum force(Mpa) | 60-65 | ISO 178 | |
Flexural modulus(Mpa) | 2100-2400 | ||
Impact strength(KJ/m2) | 65-100 | ISO 179 | |
Notch impact strength1(KJ/m2) | 25-35 |
*1. Test condition: temperature (T)=190 ℃; Mass (m)=2.16kg.
*2. Test condition: bending stress=0.45MPa; Heating rate=120 ℃/h.
*3. Test condition: load=10N; Heating rate=120 ℃/h.